1: Grinding
With 80 waterproof abrasive paper, on the shop will air squeeze net, the sand paper "paste" on the pads, open the switch of the motor, water supply, grinding, polishing to the surface without coarse skin, with a purpose of 320 sandpaper grind, grind the sand ripples to fine, two minutes later, in 1200 sandpaper grinding, make the product more fine sand grain surface.
2: Polishing (rough polishing, middle polishing, fine polishing, mirror polishing)
1) Rough polishing: polishing with special linen wheel or wool wheel of titanium alloy and special permanent luminescent titanium wax to achieve smooth surface of the product. Pay attention to polishing intensity and product polishing direction.
2) in the polishing: with titanium alloy special polishing coarse cloth wheel or fine wool wheel and titanium alloy special permanent luminous polishing wax polishing, remove the rough polishing left lines, and the product surface has brightness.
3) Fine casting: use special cotton wheel for titanium alloy and special permanent luminous fine casting wax for titanium alloy products to reach high brightness. The surface of the product also has some slight fabric lines.
4) Mirror polishing: with a special titanium alloy loose bleached cotton wheel and a special titanium alloy mirror polishing wax, remove the slight cloth lines on the surface of the product, so that the mirror light of titanium alloy can be.
But the above operation is the need for professional polishing hands to achieve product polishing requirements, mainly polishing strength, speed, direction and other details.
